PCM series

The PCM series is our flagship touring grade 2 channel amplifier. Exemplifying over 15 years of research and development by SAE Audio, they feature our most advanced technologies in both Regulated Switch Mode Power Supplies and our patented Class I? power modules. The PCM Series amplifiers deliver a massive power density (4600W per channel @ 2Ω with the largest PCM20) with unprecedented sonic quality from a very lightweight 2 rack-space amplifier. With this rock solid performance and extreme efficiency, the PCM Series amps represent the industry standard for world-class professional touring sound reinforcement applications.

Phase

Amplitude

Features

  • SAE Audio’s renowned Regulated SMPS power supplies.
  • High efficiency Class I? power modules.
  • Differential Amplifier balanced inputs for improved CMRR and noise rejection.
  • High grade components for a superior sonic performance.
  • Maximum stability at continuous full-power operation at 2Ω loads.
  • XLR input and signal link connectors.
  • SpeakON NL4 and binding post output connectors.
  • Input sensitivity selector on the back panel (32dB / 1v / 0.775v).
  • Routing mode selector on the back panel (stereo / bridge-parallel).
  • Mains circuit-breaker on the back panel.
  • Channel independent temperature, protection and clip warning indicators on the front panel.
  • Channel independent power and -5dB / -10dB / -20dB / signal presence indicators on the front panel.
  • Parallel and bridge indicator on the front panel.
  • Lightweight design (15.5kg on the highest power PCM20).

Specifications


Model PCM1000 PCM2000
Output power (AC 220v/50Hz. +/-10%. All channels driven output power, THD=1%)
8Ω Stereo 1000w x2* 2000w x2
4Ω Stereo 1750w x2** 3500w x2*
2Ω Stereo 2250w x2** 4600w x2*
8Ω Bridge 3500w** 7000w*
4Ω Bridge 4500w** 7800w*
Other specifications
Frequency Response 20Hz – 20kHz, +0/-1dB 20Hz – 20kHz, +0/-1dB
THD+N < 0.05% < 0.05%
S/N Rate ≥ 100dB ≥ 85dB
Damping Factor > 500 > 280
Input Sensitivity 0.775v / 1v / 32dB 0.775v / 1v / 32dB
Input Impedance (bal/unbal) 20kΩ / 10kΩ 20kΩ / 10kΩ
Voltage Gain 41.2dB 44.2dB
Output circuitry Class D Class ITM
Dimension / Weight
Product Dimensions (mm) 483×306.5×89 483×456.5×89
Packing Dimensions (mm) 560x420x170 595x565x170
Weight 7.9kg 15.5kg

Remark:
1、*,The power is tested under the condition of 40ms burst,1kHz sine wave and 1% THD.
2、**,The other power is tested under the condition of 20ms burst,1kHz sine wave and 1% THD.
3、SAE reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.